Why is My Dyson Vacuum Not Charging? A Complete Guide.

(Last Updated On: October 13, 2022)

Every homeowner must have a Dyson cordless vacuum for innovative cleaning solutions. Dyson offers a variety of sizes and shapes to suit the needs of every household. What happens if your Dyson vacuum doesn’t charge?

Dyson vacuum not charging can be caused by various factors, such as poor electrical connectivity or extreme temperatures.

All Dyson vacuums have gone cordless. It is, therefore, essential that your Dyson Vacuum is charged correctly. This troubleshooting guide will help to identify any charging problems and determine if a replacement battery is necessary.

Dyson Vacuum Not Charging: What Causes It?

We’ll share with you every reason your Dyson might not charge, as well as the correct checks and fixes that can be done to bring it back to its usual self.

Why is My Dyson Vacuum Not Charging

Verify that the vacuum is correctly plugged in.

You may have forgotten to plug in your phone or turn on the outlet switch to charge it. Ensure the charging cable and vacuum are correctly seated in the charging station.

Even if all the items are in the correct order, your Dyson vacuum will not charge. Sometimes, the problem may be caused by a bad outlet.

It is worth checking if your Dyson receives power when plugged in. You should also check that the power source is sufficient to charge your vacuum.

You can also test other appliances to confirm that the outlet is working correctly. You can fix the outlet if they aren’t charging.

Determine if your batter needs a replacement.

The Dyson vacuum’s battery will last for a few years before it loses its ability to hold a charge. The battery can be used for up to three years if you have a V6 vacuum.

It will continue to decline, and its run-time will decrease significantly. The battery is rapidly degrading, and the vacuum will not last as long.

You will eventually experience Dyson vacuum problems if the batteries are not replaced. This is true for all Dyson models except the V7 and V8, but the V10, V11, and V11 have new technology that allows them to last longer. You should also try these other solutions if you use the most recent models before claiming your warranty.

Verify that the charging cord has not been damaged.

Your charging cord may be damaged and unable to transmit enough power to charge your battery. Check the charging cable for fraying or unraveling.

You might find that your pet has chewed on the charging cord, or you have pulled too hard. You can always test the charging cable with another line.

You can buy an additional yarn from Dyson or your local retailer if you don’t already have one.

Inspect the battery case for damage.

The battery can be found on the handle of a Dyson vacuum. You should be able to take the removable battery pack out of older models, such as the V6 or V7, to check for any problems. You may notice cracks or damage to the casing.

In this case, the battery will need to be replaced altogether. The battery in new Dyson V10 or V11 models is protected by an outer layer, making it less likely to happen.

Check out the fuses.

Dyson vacuums have many safety features, including over-current protection and cover-leak protection. These safety features are often connected to the fuse built into the vacuum’s charge. This will prevent excessive current from damaging the machine.

The fuse protecting the vacuum could have blown if there had been a power surge. The fuse will need to be replaced.

The fuse is located in the small panel at the plug. You can take the board off and remove the old fuse. Make sure you get a replacement fuse with the same amp rating.

Read More: How to Reverse a Vacuum Cleaner to inflate?

Mount the charging station.

It might not be an issue in all cases, but it’s worth trying if something else fails. If the vacuum is wall-mounted, you should mount it.

You might notice that the charging station cable is not reaching the vacuum. This could be because the line is too stretched to allow the vacuum to charge. Then mount the charging station and see if the vacuum charges.

Vacuum

Although this is unlikely to happen often, it can be a problem if all other options have failed. The vacuum’s interior can become clogged with dust and dirt, which could cause a problem with the vacuum’s connection to the battery.

Although this is unlikely to happen very often, it could cause your Dyson vacuum to stop charging. To see if the Dyson vacuum is working again, you should clean it thoroughly and dry it.

Why is My Dyson Vacuum Not Charging

Check for any blockages in the dust canister or wand. Also, inspect the filters for any obstructions and clean them up if necessary.

After that, you can test the vacuum to verify it is working. If the problem persists, visiting a local repair shop should suffice. Check to see if your warranty is still in force and take advantage of it.

Conclusion

Your Dyson vacuum may not charge for several reasons. Fortunately, these are often easy to fix. Although there are occasions when Dyson customer service may be required to order a replacement part, the majority of the time, it is painless. These tips can be helpful to others who might face the same problem in the future.

Frequently Asked Questions

How can I tell if my Dyson battery needs replacement?

If your machine is not in Max/Boost mode and you notice a decrease in run time, it may be time to replace the battery. All of our machines come with a 2-year warranty, which includes the battery.

Is the Dyson blue light on while charging?

When charging, the LED light at the handle will flash blue and turn off when fully charged. Fully charging your battery can take up to 4 hours.

Is there a way to reset a Dyson vacuum’s settings?

Dyson vacuums don’t have dedicated reset buttons. Resetting your Dyson vacuum will depend on what prevents it from functioning; if your vacuum has been overheated, clear all clogs and allow the unit to cool completely for around an hour.

My Dyson has suddenly stopped working.

The machine heats up, and cutting out is the most common reason for no power. If your vacuum cleaner is experiencing power loss, you should leave it on for at least 30 minutes before turning it back on. Check for obstructions and clean the filters if it turns on again after one hour.

hanzalasheikh796
I am a Hanzala Sheikh. I write creative Blogs. This website is Started with the goal to help Vacuum Cleaner Users by providing them with all the information that they need for Vacuum Silk for fundamentals, some tips, and ideas.