Dyson is a renowned brand that offers powerful and innovative vacuums designed to effectively capture microscopic particles, including dust, dirt, and dander.
However, these particles can accumulate over time, leading to a dirty filter that can negatively impact the vacuum’s performance.
If you’ve invested in a Dyson vacuum, it’s important to properly maintain it to ensure its longevity. Fortunately, Dyson vacuums are easy to clean and maintain.
We’ve put together some straightforward tips on how to clean your Dyson vacuum to keep it in optimal condition.
How to clean a Dyson Vacuum?
In summary, it is crucial to clean your Dyson vacuum cleaner regularly to maintain good suction performance. It is also recommended to replace the filter with a new one every 12 months.
Neglecting to clean the vacuum can result in clogging, loss of suction power, or even breaking.
It is essential to research the best cleaning method for your specific vacuum cleaner, as not all filters can be washed the same way.
If you own a Dyson vacuum, there’s good news for you! I have created a comprehensive step-by-step plan to clean your Dyson vacuum and make it look new again.
What You’ll Need to Clean a Dyson Vacuum
- Phillips head screwdriver
- A small brush or old toothbrush
- Vacuum cleaner hose attachment
- Compressed air canister (optional)
- Microfiber cloth
- Dish soap
- White distilled vinegar (optional)
- warm water
- 1 mild soap(optional)
Clean a Dyson Vacuum with this easy step by step
Here is a possible rephrased version of the paragraph according to Google guidelines:
Always unplug your vacuum cleaner before performing any maintenance tasks.
Empty the dust canister
Once it’s full, remove the canister and empty it outside to avoid allergens and mess. Shake the canister thoroughly and clear any blockages.
Cordless models usually have a red trigger/button near the handle to release the canister, but check your manual for specific instructions.
Clean the canister
Use a damp microfiber cloth to wipe the inside of the canister. Do not immerse it in water or use any cleaning chemicals. Use compressed air to reach difficult areas, but do this outside.
Remove the filter
Filters protect the motor by capturing large particles such as dust and pollen. Locate and remove the filter for cleaning.
Cordless models usually have the filter near the handle, while upright models may have one on top of the canister and another on the floor head.
Canister models have the filter on top of the dustbin. Consult the manual if you’re unsure.
Wash the filter
Tap the filter to detach any loose dust and rinse it under cold running water. Rub it gently by hand to remove any remaining dust.
Rinse the filter with warm water until the water runs clear. Shake the filter to remove excess water and air-dry for at least 24 hours. Ensure that the filter is completely dry before replacing it.
Untangle the brush roll
Use scissors to carefully trim any hair tangled around the brush roll. Don’t pull or force the hairs, as this can damage the vacuum cleaner.
Use a damp microfiber cloth to clean the brush roll compartment.
Check the hose for blockages
If the vacuum cleaner is not working correctly, check the hose for blockages. Use a long and thin object, like a mop handle, to push through and clear the blockage.
Alternatively, soak the hose in warm water and vinegar for ten minutes before rinsing and leaving it to dry.
Clean the attachments
Don’t forget to clean the crevice tool, mini motorized tool, and other attachments. Remove trapped dust and hairs, then wipe the attachments with a damp microfiber cloth.
Wipe down the exterior
Clean the exterior of the vacuum cleaner with a damp microfiber cloth.
Allow all parts to air-dry for at least 24 hours before reassembling your Dyson vacuum cleaner. Remember to maintain your vacuum cleaner regularly to ensure optimal performance.
How to Clean Filters On Dyson?
To clean your Dyson machine’s filters, first, turn off and disconnect the machine from the wall socket.
Remove the filters from the machine and wash them in cold water by rinsing them under a running water supply.
Gently squeeze the water out of the filters and repeat until the water runs clear. Dry the filters completely by leaving them in a warm place for 24 hours.
Once the filters are completely dry, replace them back into the machine.
Tips for Keeping Your Dyson Vacuum Filter Clean Longer
To maintain your Dyson vacuum’s performance, it’s recommended to use high-power mode only when necessary.
The machine is designed to operate in auto or normal mode for daily use. Overusing the high-power mode can strain the machine and increase the likelihood of filter blockage.
Prior to vacuuming, dispose of any large debris you can pick up.
Regularly cleaning the filter reduces the effort needed for maintenance. The more frequently you clean it, the easier it will be to maintain.
To sum up, understanding how to properly clean your Dyson vacuum is crucial for maintaining its value.
It is recommended to clean it at least every two months, or more frequently if necessary, and to ensure that you are using the appropriate materials for the task to achieve optimal results.
Why should I clean my Dyson vacuum?
To keep your Dyson vacuum in good working condition and extend its lifespan, regular cleaning is essential. Accumulated dirt, dust, debris, and pet hair can cause blockages in vital components of the machine, which can lead to reduced suction power and even machine failure. Therefore, it’s important to clean your Dyson vacuum frequently to prevent such issues from arising.
Can you clean the inside of a Dyson vacuum?
According to Dyson, it is not safe to clean the inside of a Dyson vacuum. Only the filters and brush bar can be cleaned without disassembling the machine, and it’s not recommended to do so unless you have experience.
Can I use bleach to clean my Dyson?
To avoid damaging the plastic parts and filters of your Dyson vacuum, it’s important to never use bleach when cleaning. Instead, use dish detergent and water, or compressed air if necessary.
Do I need to disassemble my Dyson vacuum every time I clean it?
“You don’t need to take apart your Dyson vacuum every time you clean it. You can clean the entire vacuum without disassembly, provided you take the necessary steps such as removing tangled hair from around the brush bar and unclogging the hose using canned air or a compressed air canister.”
How do you deodorize a Dyson vacuum?
If you want to remove any odors from your Dyson vacuum, there are a few things you can do. One option is to place an open box of baking soda near the vacuum’s storage area. You can also try some DIY methods, such as cleaning with vinegar or opening windows while vacuuming.
Can I clean the cyclone part of my Dyson?
t is not safe to clean the cyclone part of your Dyson vacuum. You should only clean the filters and brush bar to ensure the safe and proper functioning of the vacuum. Disassembling other parts is not recommended, especially if you don’t have the necessary experience.
How do I open my Dyson vacuum?
There are different methods to access the inside of a Dyson vacuum, but the most typical way is to push the button located on the handle and separate the housing.
Related Article: What Can I Use Instead of a Vacuum Belt?