How to Clean a Dyson Canister Filter? Best 6 Tools

(Last Updated On: July 23, 2022)

Dyson cordless vacuums can be powerful but also very easy to use. One of the most critical tasks is to empty the trash bin to maintain your cordless vacuum.

We’ve researched and compiled instructions on how to open the debris bins from a few cordless Dysons.

Dyson vacuums are very easy to use. Dyson cordless vacuums will have a red button that opens the canister door.

Although Dyson cordless vacuums may have slight differences in design, they all work similarly. You can empty the canister and also remove it for cleaning.

Please continue reading to learn more about cordless vacuums, how to use them, and troubleshooting. However, How to Clean a Dyson Canister Filter?

Useful Tools and Materials

  • Air Compressor, or Reusable Duster
  • Scissors
  • Water
  • Use a small scrub brush or sponge
  • Microfiber cleaning cloths
  • Flathead Screwdriver or Quarter (depending upon your vacuum model).

1. Empty the vacuum canister and clean it

After the vacuum has been turned off, unplug it and remove the Dyson Canister Filter or vacuum bin from the machine.

This is easy with most Dyson vacuum models, which include a red button that allows you to release the vacuum bin. Please take it to your trash bin or compost bin.

To remove the contents, press the button on the dust Dyson Canister Filter.

Maintenance Tip Do not fill your vacuum cleaner canister more than halfway before emptying it. This will ensure your vacuum has good suction power.

Separate the canister and cyclone next. You can also use an air compressor to remove dirt and debris from the vacuum’s cyclone holes.

If possible, take the storm outside (this will make it messy! Use the air compressor to loosen the debris.

You don’t have an air compressor. You can use the cold setting on your hairdryer to get rid of some debris. Although it will not be as effective as an air compressor, this is still better than nothing.

Next, grab a damp microfiber towel. The microfiber cloth can be used to clean any dust or debris that remains on the canister’s interior and around the cyclone.

Most models can be rinsed under cold water. To clean, use a sponge or brush. Before you irrigate your cyclone, read the instructions on your vacuum.

Read More: Why are Roomba so Expensive? 7 Best Tips

2. Clean and Remove the Vacuum Filter

This step is straightforward. Locating and removing the Dyson Canister Filter is the hardest part. The majority of Dyson Canister Filter can be found near the cyclone. You can find them in purple and lift them out to clean.

Remember that some Dyson vacuum models include two filters. One is near the cyclone; the other is within the ball or side housing.

You can rinse your Dyson Canister Filter under running water. Dyson suggests avoiding using detergent or soap to clean your vacuum filter.

Allow your Dyson Canister Filter to dry thoroughly in a warm place for 24 hours before you insert it into your vacuum. You should not dry the filter in a dryer.

Dyson Canister Filter be cleaned every 3 to 6 months, depending on the model.

3. Clean and untangle the vacuum brush bar

You should regularly untangle any hair, string, or other materials that may have wrapped around your vacuum brush bar to keep it in top shape.

The vacuum brush is responsible for removing dirt and other debris from hard floors and carpets. Removing debris and dirt from your carpet and hard floors is essential to make them do their best work.

Depending on which model you have, you will need a flathead screwdriver (I use a quarter) or a coin to remove the Dyson vacuum cleaner brush. The vacuum brush can be detached and removed.

Grab your scissors and remove hairs or debris from the vacuum brush.

Next, take a soft brush or a moist microfiber cloth and clean the vacuum bar. Before you put it back on the vacuum, let it air dry.

Cleaning your vacuum’s soleplate and wheels is also a good idea. This is essential to ensure that your vacuum does not spread bacteria or grime throughout your home.

4. Clean Vacuum Attachments

It’s a good idea to clean any attachments that come with your Dyson vacuum. The exact process will apply to the vacuum brush bar.

You can use your fingers to remove hair and debris stuck on the vacuum attachment. You can check for blockages in the vacuum attachment with your fingers.

To clean the extension, use a microfiber cloth or soft brush. Dyson recommends that you avoid soaps and detergents.

5. Clean the Hose

Your vacuum brush will pick up debris and be sucked into the vacuum hose. Your vacuum’s suction power will be affected if the hose becomes clogged. You can check the hose for blockages quickly.

To determine if and how to remove the vacuum line, refer to the instructions provided by your manufacturer. Visually inspect the vacuum hose for any obstructions after it has been removed.

You can push out any debris from your vacuum hose with a broomstick. Using the same broomstick, you can push a small, damp cloth through the hose. The fabric will grab dirt and dust stuck to your vacuum hose walls.

Before you attach your vacuum hose to it again, allow it to dry completely. Mold can develop in your vacuum hose, which you don’t want!

6. Vacuum the exterior

After you’ve cleaned the interior of your vacuum, now it’s time for the exterior. You only need a microfiber cloth or magic eraser to get the job done.

Also, I recommend you regularly disinfect your vacuum handle (or any other contact points in your house – such as doorknobs and light switches).

How Often Do You Need to Clean Your Vacuum?

 The Dyson V8 cordless vacuum is used daily by us for small tasks around the house. I make sure to clean the filter at least once per month. My vacuum is cleaned around four times per year.

How Often Do You Need to Clean Your Vacuum

Dyson recommends cleaning your Dyson Canister Filter at least once or every three months, depending on your model. This should not be a problem now that you know how to clean a Dyson vacuum cleaner filter.

You can probably do without deep cleaning your Dyson vacuum if you empty the canister and check the vacuum hose for any blockages. Now that you know how to clean a Dyson vacuum, it doesn’t need to be intimidating.

What can I do if my Dyson canister doesn’t open?

Double-check the lever or release button before you attempt to open the canister using tools or force. If the release button is not fully engaged, the canister will not open.

Before moving on to the next troubleshooting step, ensure that the release button is fully engaged.

You might have a stuck release lever.

Dyson users may experience a problem where the release lever becomes stuck in the canister. Try pulling the lever back slightly if it does not push beyond a certain point.

You can make the lever back by pulling it in the opposite direction.

If this does not work, you might need to add pressure or lubrication. To lubricate vacuum parts, you can use WD40. You should not apply too much pressure to the lever, or it could break.

Although the lever opens the canister, it won’t work.

If the release button does not move freely, but the canister is still closed, your release mechanism could be a problem.

If you feel comfortable with the tools, you can use a flathead screwdriver to open the canister door. The lid suction will provide resistance, but you should not apply too much pressure.

Dyson can repair your vacuum. They can improve and replace any defective parts.

How big is Dyson’s dust bin for cordless vacuums with Dyson?

Your vacuum’s a dust bin capacity will vary depending on its model. The bin should be filled up completely to stop debris from building up.

Every debris bin will have a line marking the maximum fill line. Some models include text, and others have a circle that circles the entire container.

A cordless vacuum can hold between 0.14 and 0.20 gallons. This is half the volume of an upright Dyson vacuum. It is essential to empty the bin often because it has such a small capacity.

What happens if you exceed the maximum fill line?

It can be tempting to push the limit. You may think there isn’t enough space. There is a reason you shouldn’t go beyond that line.

After the debris has passed the fill line, it will be in the working zone of the cyclone. Clogging can lead to reduced efficiency. With every use, debris caught in the hurricane may leave foul odors.

What is Dyson’s suction power?

Your Dyson’s suction power will depend on which model you have. The units of suction power are measured in air watts [AW].

The Dyson V7 is at the lowest end of the suction spectrum, with 100 AW, and the Dyson V8 has 115AW. Dyson V10 models have 151 AW, 185 AW, and V11 models have 185 AW, respectively.

Are Dyson cordless vacuums just as powerful as corded ones?

Due to their high suction power, some Dyson cordless vacuums can have as much suction power as corded models.

The average suction power of cordless vacuums ranges between 80 and 100 AW. It ranges from 180 to 200 AW for upright vacuums.

Dyson cordless vacuums have powerful suction. The V10 and V11 models offer the best cordless alternatives to an upright vacuum.

Even though cordless vacuums are powerful, they still require battery power. They can lose their battery packs and must be replaced regularly.

For more information, see our article about how long Dyson cordless vacuum batteries last.

Dyson V10 vs Dyson V11Comparion

Dyson releases a new cordless vacuum cleaner every year. The Dyson V11 Absolute was the most recent model to replace the V10 Absolute. We were inspired to create a Dyson V10 and Dyson V11 comparison.

This comparison asks the critical question:

Did Dyson make improvements to the technology that it’s worth purchasing the newer V11 Absolute?

To determine the similarities and differences between the premium cordless vacuums (v10 and v11), we will compare them.

You will also see for who it is worth purchasing the newer model.

Both cordless vacuums were clean in our tests. They also had many helpful extras.

Dyson V10 Advantages

  • Suction power: 150 AW
  • Runtime: approx. Runtime: approximately 50 minutes
  • Dirt container volume: 0.76 l
  • Weight: 2.6kg (5,7 lbs).
  • Cleaning test results: Perfect

Dyson V11: Advantages

  • Suction power: 185 AW
  • Running time: approximately. Running time: 60 minutes.
  • Dirt tank volume: 0.76 l
  • Weighing: 3.05 kg (6.72lbs).
  • Cleaning test results: Perfect

Conclusion

These cleaning tips will make your Dyson vacuum cleaner smell and look great. These tips will help you clean your Dyson vacuum cleaner. If you want to reduce your vacuum problems, don’t forget to keep it.

Are you ready to clean the vacuum cleaner? This post should have provided a solid foundation for maintaining your Dyson vacuum cleaner.

FAQS

How can I deep clean my Dyson vacuum cleaner?

Start by removing all parts. Next, soak the canister and any other washable components. After giving them a thorough scrub, dry them before putting them back together.

Use the compressed air can to remove dust and debris from the vacuum.

How can you disassemble a Dyson vacuum cleaner?

These steps to disassemble the Dyson vacuum cleaner: Open the storage compartment for attachments and tools. Remove the dirt cup.

Open the filter door on the vacuum’s side. Remove screws that secure the lens to vacuum.

How can you empty the root of a Dyson vacuum?

To release dust into a trash can or wastebasket, pull the trigger. To remove dust from the fine dust collector, shake or tap hard.

B Press down on the bin’s center to seal it. Before emptying the container, disconnect the machine from an electrical outlet.

How do you empty the Dyson vacuum cord?

Before emptying the clear container:

  1. Switch it off and unplug it.
  2. Push the red button at the top of your carrying handle to remove the clear bin unit and cyclone.
  3. Press the red bin release button to release the dirt. The bin will slide down, cleaning out the shroud as it goes.

Is it possible to put a bag into a bagless vacuum?

Check to see if the vacuum is bagged or bagless. If you have the former, you must use a bag whenever you vacuum.

Your vacuum will not clean properly and blow out the air and dust again. However, if your Dyson Canister Filter is not bagless, you don’t need to use a bag.

Frequently Asked Questions

How can I deep clean my Dyson vacuum cleaner?

Start by removing all parts. Next, soak the canister and any other washable components.
After giving them a thorough scrub, dry them before putting them back together. Use the compressed air can to Dyson Canister Filter remove dust and debris from the vacuum.

How can you disassemble a Dyson vacuum cleaner?

These steps to disassemble the Dyson vacuum cleaner: Open the storage compartment for attachments and tools.
Remove the dirt cup. Open the Dyson Canister Filter door on the vacuum’s side. Remove screws that secure the lens to vacuum.

How can you empty the root of a Dyson vacuum?

To release dust into a trash can or wastebasket, pull the trigger. To remove dust from the fine dust collector, shake or tap hard.
B Press down on the bin’s center to seal it. Before emptying the container, disconnect the machine from an electrical outlet.

How do you empty the Dyson vacuum cord?

Before emptying the clear container:
1.       Switch it off and unplug it.
2.       Push the red button at the top of your carrying handle to remove the clear bin unit and cyclone.
3.       Press the red bin release button to release the dirt. The bin will slide down, cleaning out the shroud as it goes.

Is it possible to put a bag into a bagless vacuum?

Check to see if the vacuum is bagged or bagless. If you have the former, you must use a bag whenever you vacuum. Your vacuum will not clean properly and blow out the air and dust again. However, if Dyson Canister Filter is not bagless, you don’t need to use a bag.

Is it possible to put a bag into a bagless vacuum?
Check to see if the vacuum is bagged or bagless. If you have the former, you must use a bag whenever you vacuum.
Your Dyson vacuum will not clean properly and blow out the air and dust again. However, if your vacuum is not bagless, you don’t need to use a bag.

hanzalasheikh796
I am a Hanzala Sheikh. I write creative Blogs. This website is Started with the goal to help Vacuum Cleaner Users by providing them with all the information that they need for Vacuum Silk for fundamentals, some tips, and ideas.