How do I Clean the IRobot filter?

(Last Updated On: February 18, 2023)

IRobot’s Roomba vacuum cleaners can be pretty self-sufficient, with the most sophisticated models such as the top-of-the-line Roomba S9+.

However, some hand-held maintenance remains required even with all the sophisticated features and automated functions.

You’ll need to clean and maintain the Roomba frequently to keep the Roomba in good form.

Roomba IRobot filter is one of the components you’ll need to keep clean and well-maintained.

The air filter holds dust, dirt, allergens, and other tiny particles. If you are allergic, you’ll need to wash and replace your IRobot filter more often.

Cleaning IRobot filter is reasonably simple to do for the majority of people, regardless of the type of model.

It’s not rocket science; however, dependent on the model, they may or might not be intuitive for everyone.

9 Easy Steps to Clean Roomba Filter

“I’ve cleaned the dustbin. What’s the reason I should cleanse the IRobot filter?”

The IRobot filter is separated from the bin. It serves a specific purpose and requires maintenance.

Much more than the dustbin, it is likely to be soiled with dust and dirt.

When these particles of dust and dirt pile up and accumulate, it could stop your Roomba from operating efficiently. This means it won’t be able to remove the debris accumulated on your home’s floors.

The good news is that getting rid of your Roomba IRobot filter is straightforward.

Just follow our simple and easy instructions, and you’ll be good to start!

Learn more about:

• Nine simple steps to remove dirt from the Roomba filter.
• Why filters shouldn’t wash using water.
• Where can the Roomba filter be found based on the series it is based on?
• How to safely remove and reinstall dirt filters out of the bin.

1. Click the bin release tab

Every one of the Roomba IRobot filter is in the dustbin.

It is essential to take the dust bin out of the device before you are in a position to clean the IRobot filter.

The first thing you need to do is locate your bin’s release tab.

Examine the back of the Roomba, then look out for your icon for the bin () symbol.

• For the s series: on the middle-top portion in the Roomba unit. Roomba unit.
• For the e, I and the j series on the sides of the rear part of the Roomba unit. Roomba unit.
• For 600, 700, 800, and series: on the top of the rear on Roomba. Roomba unit.

Upon pressing the release button on your bin, you will hear the “click” sound.

2. Remove the trash bin and dispose of it in the unit.

Then, you need to take away the Roomba dustbin out of the unit.

Depending on the program you’re using, this is how you can remove it from the Roomba dustbin:

• For a series by pulling it up.
• For the e, I and the j series by pulling it to the side.
• For the 600, 700, 800 and series 900.

A health tipWhether your symptoms are an allergic reaction to sinusitis or not, you should wear the mask. Because the dust, dirt and allergen accumulated in the garbage can cause an allergic reaction. Wearing hand gloves can also help.

Read More: Where are Dyson Vacuums Made?

3. Open the door for the dustbin or the filter

To complete this step, you must take your time to understand which method applies to you.

Some filters are in the dustbin. Others are located on the sides.

For the, I and the j series, the filters are located on the right-hand edge of the bin (facing the door). This means you don’t need to open the door to access anything. This step isn’t necessary!

Roomba Series s, 600, 700, 800, and 900 have filters.

Here’s how to gain access to the Roomba IRobot filter:

• For the s, 800 as well as 900 series, Open the filter door on the top.
• For the 700 and 600 series For 600 and 700 series: open the dustbin doors on the right.

4. Removal of the filter from the dustbin

Roomba IRobot filter come in various sizes and shapes, based on the particular series.

For example, the s 800, 900, and s series filters are constructed to be rectangular pieces. The e, I and the series filters are constructed as smaller but chunky rectangular blocks.

700 series filters are also available in small rectangular blocks. However, it is two smaller units. They are attached to the right and left inside-top in the dirt bin.

But these filters have been constructed in a half-circle. They are attached to the top of the trash bin.

Based on the Roomba series you’re using, Here’s how to remove the filter:

• Take the tab in yellow for the 800 and 900 series and pull it up.
• For the 600 and 700 series: grasp both sides and push it towards the front.
• For the s series, Take the tab located in the centre of the filter, and lift it.
• For e, I and the J series grasp both the filters’ tops and sides and then slide it to the left.

Removal of the dustbin’s filter may require some force. Make sure to pull it as softly as you can to not cause damage or breakage to the Roomba IRobot filter.

5. Shake off dust and dirt

Find the closest dustbin to clean up dirt and dust accumulated on the IRobot filter. Simply shake off the filter or tap it near the edges of your bin.

A word of caution: IRobot filter are not designed to be cleaned or come in contact with any liquid. Don’t try to clean your Roomba IRobot filter or even wipe them off with a damp cloth.

Cleaning it with hot or cold water may remove its IRobot filter capabilities. Decreased effectiveness of its filtering.

If you notice dirt or dust stuck to the filter, try to get rid of it using a tweezer or similar device. Be careful not to get your hands on the mesh fibres of the filter as much as you can.

If you see your Roomba IRobot filter turning “dark,” take it as a clear signal to replace the IRobot filter.

IRobot filter used too often are less efficient since the mesh fibres are likely to be damaged. It cannot effectively remove dust, dirt, and allergens.

6. Clean the trash bin using warm water

Notification: This is optional. It is not the case that all Roomba dustbins can be washed. Be sure to read your user’s instruction manual.

Examples of the Roomba series with washable dustbins are the e I, j, and the s series.

If you own a washable dust bin and want to clean it, it is possible to clean any accumulated dirt on it, particularly on the edges and the lids.

It is essential to keep in mind that a washable bin can only be cleaned by hand. Please don’t put it in a dishwasher to wash it.

Things to keep in mind while washing your clean Roomba dustbin:

• Only use warm water.
• Air-dry it. Avoid using a hand blower.
• Clean the filter and set it aside.
• Lift all lids and open them to access the interior’s corners.

7. Re-insert the filter into the dustbin

After the dust bin is clean with the dust bin clear, place the IRobot filter into the correct position.

Based on the Roomba series you’re using, Here’s how to replace the filter:

For the 800 and 900 series, The top part of the filter is then put back into its compartment for the filter.

For the series s: take the tab located in the centre of the filter and place it back into the compartment for IRobot filter.

• For the 700 and 600 series: Grab parts of the filters and then attach them to the top of the dust bin.
• For e, I, as well as the j series, grasp each end of the filter and then slide back towards the left of the trash bin (facing the door to the dustbin).
• If you hear a “click” sound, the filter is in good shape and properly installed.

8. Close the door for the filter or the dustbin

If the Roomba filter is placed in its location, shut the dustbin or the door to the filter.

You don’t need to close the lid for the e, I, and the j series. The IRobot filter is placed on the right-hand part of the bin. Therefore, you can bypass this step!

In case you’re looking for other episodes, we’ll tell you how you need to know:

• For the 600 and 700 series: Close the dustbin’s door with a push forward.
• For the s, 800, and 900 series, close the filter door by pushing it down.

You should also hear the “click” sound when closing the IRobot filter door or the dustbin effectively.

If it’s not closing, the IRobot filter was not properly placed. Make sure to remove and reinstall the Roomba IRobot filter again.

9. Return the dustbin to the Roomba unit

Then, secure the bin and secure it to the Roomba compartment.

Based on the Roomba series you’re using, Here’s how to make sure that the dustbin is secure:

• For the S series: put the dustbin in the empty compartment on the top of the Roomba. Roomba unit.
• To use e 600 700, 800 and 900: put the trash bin in the empty compartment on the sides of the rear side of Roomba. Roomba unit.

If you don’t use it, allow your Roomba robot to dock to its Home Base.

If you find that your Roomba is at the end of its cleaning process, put the appliance back in its original location. It will continue to work on its clean-up process.

HOW TO CLEAN ROOMBA VACUUM BRUSHES

To ensure optimal performance, you should inspect the Roomba multi-surface brushes and the cleaning head at least once per week and twice if you have pets.’ Hild advises. Hild.

1. The cleaning head module can be opened by opening the door by pressing the green tab located on the left side of the multi-surface brush.
2. Clean the brushes off the robot. Ensure that hair and other debris are removed off the square or hex pegs on a Multi-surface brush.
3. Clear debris can be seen on and beneath those bearings in grey.
4. Place the bearings onto the brushes with multi-surfaces.
5. Check that the vacuum route is free of obstructions.
6. Make sure you match the form of the multi-surface brush pegs to the module’s cleaning design.

HOW TO CLEAN THE CHARGING DOCKS

Being among the most powerful vacuum cleaners that are cordless available and the Roomba charging docks make sure your vacuum is fully charged and ready to tackle the entire house.

The components could be a source of dust, and it is important not to ignore them when you learn how to clean your Roomba vacuum thoroughly. The procedure is (almost) immediate.

Clean the sensors for docking on your Base(r) and the Home Base(r) as well as the robot using an unclean melamine foam like a Magic Eraser(opens in a new tab) which you can buy on Vacuumsilk.

HOW TO CLEAN THE CLIFF SENSORS

The cliff sensors in the Roomba vacuum cleaner accomplish exactly what is stated on the box.

They prevent your device from falling off a ‘cliff’ or perhaps the staircase inside your home or balcony for those who reside within an apartment.

They work by bouncing infrared light off of the surface photocell sensors.

HOW TO CLEAN A ROOM VACUUM FRONT WHEELS

The front wheels of your Roomba vacuum cleaner assist it in traveling on the floor to cleanse the floor.

If you notice a little resistance (caused by dirt or other debris), it is necessary to examine the machine to remove the object causing the problem.

For those who have beautiful locks, hair may be the most common cause of blockage in your system. It is best to wash each fortnight and then change them every year.

• Here’s how to cleanse the rotating discs:
• Hold the front wheel to take it.
• Get rid of any debris inside the cavity of your wheel.

Hand-operated wheel spin. If the wheel is not spinning, remove it from its enclosure and push it hard to release the axle. Remove any hair or debris that has been tangled around the wheel.

Install all the parts after you have finished.

HOW TO CLEAN THE EDGE BY SWEEPING BRUSH

Simply put, this part of your robot vac can get to the crevices and corners of your flooring and is ideal for narrow corners and skirting areas. You can keep your sweeper in good shape with just a few tools and things you’ll find in your home.

• Remove the edge of the sweeping brush using a coin or a tiny screwdriver.

• Clean the brush.

• Take any debris out of any debris that may be on the brush’s edge and on the posts of the edge brush module.

• Install the edge sweeper.

VACUUMSILK EXPERT ADVICE ON HOW TO CLEAN A ROOM

Suppose you flip it over and lay it on its back. make use of the comb tool included along with the Roomba to take out threads and hair that may be trapped inside the brushes.’

According to Lynsey Crombie, also known as Lynsey the Queen of Clean.

Find the sensors and apply a moist rubber cloth; gently scrub them and make sure there’s nothing stuck inside the wheels, then clean the sensor with a clean wipe and then empty the dust collection canister and wash your IRobot filter.’

How Does Roomba Compare to Other Brands

Roomba vs Shark

Roomba, as well as Shark, are well-known vacuums and cleaning equipment, manufacturers. Both firms have launched their version of the top robot vacuums.

But in contrast to Shark, iRobot has been involved in the field of robotic cleaning for the entirety of its existence which is a significant improvement in its overall know-how and experience compared to Shark.

After many years of market research and development, Shark hopped on the robot vacuum train and began to develop its version of Roomba.

Although both Roomba and the Shark robot vacuum can accomplish the task, Roomba is our choice over Shark due to its unique technology like dirt detection and overall cleaner performance, as well as ease of use.

Roomba vs Eufy

Each Roomba and Eufy made their debut in the robotic cleaning industry in the same year. But, Roomba is a much more popular brand.

Eufy vacuums have a lot of similarities to the features offered by Roomba. But, there are a few significant differences between these two brands.

The first is that Eufy is a standard version of almost every Roomba model. Each model is unique in small ways, and Eufy always has a more affordable cost.

Roomba vacuums are renowned for their durability and technology and durability; something Eufy is currently trying to determine.

Although their vacuums have the same technical features as Roomba, they are not as robust. Roomba has, but the vacuum itself could be more susceptible to wear than the Roomba.

The Eufy is generally somewhat simpler to operate, and many of them come with an integrated mop, which comes with less than Roomba models that come with this feature.

Both brands will be great. In the long term, however, for those who live in large homes and pets, we’d need to pick the Roomba as our top choice.

The Roomba is unbeatable for its superior performance in battling pet hair and dust. The Eufy might be the better option for taking care of a specific area at one time.

Roomba vs Roborock

The two Roomba and Roborock are fantastic firms committed to improving the art of the vacuum robot. Each company has strengths and weaknesses regarding performance; the two companies have a lot in common.

There are some things to consider; one is the year the businesses began. Roomba was founded in the year 1990, which gave an advantage over Roborock, which was founded in the year 2014.

iRobot has had more overall knowledge of the industry. It has developed the technique of perfecting its craft which makes a significant distinction in its product’s overall quality and performance.

In terms of performance, Roombas tend to do better than Roborocks when it comes to powerlifting suction.

The suction power of Roombas is so superior to that of Roborocks. Roomba is in no way comparable to Roborocks.

The Roborock is most popular for its two-in-one mopping and vacuuming system. This is a fantastic option for people who want to accomplish two tasks simultaneously.

Roomba has been unable to nail this feature, and Roborock has a distinct advantage.

Yet, despite all these results, we believe Roomba Roomba is the best robot vacuum due to its intelligent navigation, smartphone connectivity, and general user-friendliness.

Roomba vs Dyson

Dyson is another popular manufacturer of vacuums and different cleaning items.

Similar to the majority of other household ware manufacturers that are available today have tried their hand at the market for robotic vacuums and have done a great job.

While Dyson makes a great vacuum, with the suction power that the company is well-known for, Roomba continues to expand and grow by continuously offering more options and choices for buyers.

Roombas also includes a dual-action brush made of rubber that can catch almost every hair and piece of debris in its first attempt, in contrast to the bristle rollers with the Dyson.

All in all, Roomba still receives our top spot due to Dyson being a fantastic company, lacking essential features, the robot vacuum which includes resume and recharge technologies.

Roomba vs Neato

The primary difference between the Roomba and Neato is the overall shape. As we all know, all Roombas are circular.

But the Neato is an alphabetic “D” shape, letting it fit into crevices and corners to eliminate dust, dirt and other debris efficiently.

If your home is with lots of corners that are tight, You may be able to gain from a Neato over Roomba. Roomba is due to this reason.

In other words, despite the differences, they are identical.

Roomba vs Deebot

The Roomba and the Deebot are identical vacuum cleaners in many ways. But, there are a few distinctions to take note of.

While both Roomba and Deebot can be linked to their app systems and become a “hub” for all information about the state of your vacuum,

There is a belief Roomba’s iRobot Home app works much faster and with greater efficiency in comparison to the Deebot app.

While this might not be an issue to some, however, for some, it could affect the quality of the purchase. iRobot makes it easy and easy to connect to your vacuum anywhere in the world with one click.

Conclusion

Your Roomba needs regular cleaning to prevent the accumulation of dirt and particles that can affect its performance and cause it to malfunction.

Each component does not have to be cleaned frequently. However, you must clean your IRobot filter and brushes frequently to ensure the vacuum functions correctly.

Also, you must empty the dust bin after each cycle.

If you’re fortunate enough to have the money to buy this Roomba 7i+ model, the task of emptying your dustbin won’t be something to worry about as it will empty by itself.